Witcher 3 portrait of hierarch. A binary file (with the extension .rpd) containing configuration data for use outside the Quartus® Prime software. A Raw Programming Data File is a subset of the Programmer Object File (.pof) file type, containing only device-specific binary programming data.
Austin morris 1100 manual. The Active Serial (AS) configuration scheme is supported in the 1 bit data width (AS x1) or the 4 bit data width (AS x4). The AS x4 scheme is supported only in Stratix ® V devices. AS configuration can be performed using an Altera ® serial configuration (EPCS) device or quad-serial configuration (EPCQ) device. During AS configuration, the Altera FPGA acts as the configuration master and the. PC based USB interface serial flash programmer, support 3.3V to 1.8V Flash in VCC and I/O. High programming speed, it can program at 30Mbps, it blank checking, programming and verify a 64 Mb serial flash in 53 second. Support all maker's serial flash chip from 512Kb up to 2Gb. USB interface: support both USB 1.1 and 2.0. The device interface path does not respresent a serial device; Application is missing the serialCommunication capability; The serial device is inaccessible. (see Windows.Devices.SerialCommunication) Read and write data. You can then use the SerialDevice object to read from or write to the serial port by using the Windows.Storage.Streams namespace.
You can generate Raw Programming Data Files from previously generated Programmer Object Files (.pof) with the Convert Programming Files dialog box on the File menu or the quartus_cpf utility.
Data written to a serial configuration device should be shifted so that the least-sgnificant bit is loaded into the device first. Tenno no ryoriban drama asia. For example, if the .rpd contains the byte sequence 02 1B EE 01 FA, the serial data programmed into the configuration device must be 100-0000 1101-10000111-0111 1000-0000 0101-1111.
The Active Serial (AS) configuration scheme is supported in the 1 bit data width (AS x1) or the 4 bit data width (AS x4). The AS x4 scheme is supported only in Stratix® V devices. AS configuration can be performed using an Altera® serial configuration (EPCS) device or quad-serial configuration (EPCQ) device. During AS configuration, the Altera FPGA acts as the configuration master and the EPCS or EPCQ device acts as the configuration slave. The FPGA outputs the clock on the DCLK pin and receives the configuration data from the EPCS or EPCQ device on the data pin(s).
For more information, refer to the configuration chapter of the relevant Altera device in the Configuration Handbook.
Device Serial No
Configuration Method
- Using an EPCQ device
- Using an EPCS device
Ponyprog Serial Device Programmer Download
Embedded Solution
- SRunner: An Embedded Solution for Serial Configuration Device Programming (PDF)
- Portable software driver used to program EPCS devices via an AS interface
- Works on a PC using a ByteBlasterTM II download cable
- Source code (ZIP) available for porting to an embedded system or other platform
Application Note
- Using an EPCQ device
- Using an EPCS device
Ponyprog Serial Device Programmer Download
Embedded Solution
- SRunner: An Embedded Solution for Serial Configuration Device Programming (PDF)
- Portable software driver used to program EPCS devices via an AS interface
- Works on a PC using a ByteBlasterTM II download cable
- Source code (ZIP) available for porting to an embedded system or other platform
Application Note
- AN 370: Using the Serial FlashLoader with the Quartus® II Software (PDF)
- An in-system programmability (ISP) solution used to program EPCS devices via a JTAG interface
User Guide
- Active Serial Memory Interface (ALTASMI_PARALLEL) Megafunction User Guide (PDF)
- This megafunction allows the FPGA to access the memory of an EPCS device through parallel data input and output ports
Related Documentation
